Connect with us

Medtech

How Webb’s Coronagraphs Reveal Exoplanets in the Infrared

This artist’s conception shows the fully unfolded James Webb Space Telescope in space. Credit: Adriana Manrique Gutierrez, NASA Animator The examination…

Published

on

This article was originally published by The Report Door

This artist’s conception shows the fully unfolded James Webb Space Telescope in space. Credit: Adriana Manrique Gutierrez, NASA Animator

The examination of exoplanets is a central aspect of the James Webb Space Telescope’s scientific objectives. NASA invited Christopher Stark, the Deputy Observatory Project Scientist from NASA’s Goddard Space Flight Center, to share insights on one of the methods Webb employs to investigate these distant worlds.

NASA’s James Webb Space Telescope has many different observing modes to study planets orbiting other stars, known as exoplanets. One way, in particular, is that Webb can directly detect some of these planets. Directly detecting planets around other stars is no easy feat. Even the nearest stars are still so far away that their planets appear to be separated by a fraction of the width of a human hair held at arm’s length. At these tiny angular scales, the planet’s faint light is lost in the glare of its host star when trying to observe it.

Fortunately, Webb has the right tools for the job: the Near-Infrared Camera (NIRCam) and Mid-Infrared Instrument (MIRI) coronagraphic modes. Webb’s coronagraphs block the light from a distant star, while allowing the faint planet light through to reach its sensors. This is not unlike how we use our car’s visor during sunset or sunrise to see the cars in front of us, albeit Webb uses a much fancier “visor.”

Webb Exoplanet HIP 65426 b

Webb NIRCam and MIRI coronagraphic images of the exoplanet HIP 65426 b. The white star symbol marks the location of the star blocked out by the coronagraphs. The exoplanet does not display Webb’s hallmark six-spiked diffraction pattern due to the pupil plane coronagraph masks. Credit: ASA/ESA/CSA, A Carter (UCSC), the ERS 1386 team, and A. Pagan (STScI).

Along the path light takes through Webb’s optics, there are several important locations called “planes.” The “image plane” is where the distant sky is in focus, including all astrophysical objects. The “pupil plane” allows the surface of the primary mirror to be in focus, which was used to make Webb’s “selfie.” All of Webb’s coronagraphs physically mask out unwanted starlight in both the image and pupil planes to optimize performance. Most of Webb’s image plane masks, resembling opaque spots or bars, remove starlight simply by blocking it in the image. The exception to this are MIRI’s “four-quadrant phase masks,” which shift the wave-tops of one part of the wave of light, so it cancels out with another part through a process called “destructive interference.”

Webb NIRCam Coronagraphic Image Plane Mask Hardware

Left: NIRCam’s coronagraphic image plane mask hardware, consisting of two wedge-shaped bars and three round spots (from left to right). Right: MIRI’s four coronagraphic image plane mask hardware, consisting of three phase-shifting four quadrant phase masks and one round spot (from left to right). Credit: NASA

However, due to the wave nature of light, the image plane masks can’t completely block the star. So Webb uses additional pupil plane masks, also called Lyot stops, to remove much of the remaining starlight. These pupil plane masks look very different from the hexagonal primary mirror (the telescope “pupil”). As a result, objects imaged with the coronagraphs do not exhibit Webb’s hallmark six-spiked diffraction pattern, as shown in the observations above.

Webb NIRCam Plane Masks

Illustration of NIRCam’s pupil plane mask/Lyot stop for the round image plane mask (left) and the bar image plane mask (right). Transmission through the mask is limited to the white regions. Webb’s telescope pupil is shown in gray for comparison. Credit: Mao et al. 2011

Webb’s NIRCam instrument has five coronagraphic masks, each of which can each be configured to observe at different wavelengths ranging from 1.7 to 5 microns. Webb’s MIRI instrument has four coronagraphic masks that operate at fixed wavelengths between 10 and 23 microns. The coronagraphs can observe objects as close as 0.13 arcseconds from the star, and as distant as about 30 arcseconds from the star, which roughly translates to circumstellar distances ranging from a few Astronomical Units (au) to hundreds of au around nearby stars. One AU is equivalent to the distance between the Earth and the Sun.

Despite the masks, Webb’s coronagraphs don’t perfectly remove a star’s light. To remove the last remnants of light, Webb’s astronomers will carefully use a variety of “point spread function (PSF) subtraction methods.” Simply put, this means measuring the pattern of the residual starlight, and then subtracting it from the science image. In the end, what remains is a noisy-looking pattern, which ultimately limits the faintest detectable exoplanet. This limit is expressed in terms of “contrast,” the ratio in brightness between the faintest detectable planet and the star. During commissioning, Webb’s NIRCam and MIRI coronagraphs demonstrated contrasts better than 10-5 and 10-4 at 1 arcsecond separation, respectively.

Webb MIRI F1065C Coronagraph Image

Left: Example image of residual starlight after suppression with the MIRI F1065C coronagraph. Right: The same image after PSF subtraction removing most of the remaining stellar residuals. The star is located in the center of the image. The black and yellow pattern in the center of the image set the faintest detectable planet in an observation. Credit: Boccaletti et al. (2022)

Webb’s large primary mirror and infrared capabilities mean that its coronagraphs are uniquely suited to study faint objects in the infrared and will complement other instruments currently observing at other wavelengths, including Hubble’s STIS coronagraph and multiple instruments on ground-based observatories. Exoplanet astronomers will mainly use Webb’s coronagraphs to detect giant extrasolar planets that are still warm from being formed, like those shown above, which are the first images of an exoplanet at wavelengths longer than 5 microns. Webb will also excel at imaging dense circumstellar disks of debris generated by the asteroids and comets in these exoplanetary systems, as well as protoplanetary disks in which planets are still forming. Webb’s coronagraphs can even be used for extragalactic astronomy, to study host galaxies that contain bright active galactic nuclei.

Webb’s coronagraphs won’t be able to reveal all the secrets of a planetary system. To image planets like our own around nearby Sun-like stars, we’ll need to observe even closer to the star and be able to detect planets just one ten billionth the brightness of the star. This will require a future mission fully optimized around next-generation coronagraphs. Fortunately, NASA is already looking into it. The agency’s upcoming Nancy Grace Roman Space Telescope will carry a technology demonstration instrument to test next-generation coronagraph technology. And, following the recommendations of the 2020 Astrophysics Decadal Survey, NASA is laying the groundwork for further technology development for a Habitable Worlds Observatory mission concept, a telescope that would be as large as Webb, operating in the same wavelengths as Hubble, but designed to find truly Earth-like exoplanets around other stars and search them for signs of life.

Written by Christopher Stark, Webb deputy observatory project scientist, NASA Goddard.

The post How Webb’s Coronagraphs Reveal Exoplanets in the Infrared appeared first on REPORT DOOR.

imaging
instrument
hardware
mask

Medtech

ETF Talk: AI is ‘Big Generator’

Second nature comes alive Even if you close your eyes We exist through this strange device — Yes, “Big Generator” Artificial intelligence (AI) has…

Continue Reading
Medtech

Apple gets an appeals court win for its Apple Watch

Apple has at least a couple more weeks before it has to worry about another sales ban.

Continue Reading
Medtech

Federal court blocks ban on Apple Watches after Apple appeal

A federal appeals court has temporarily blocked a sweeping import ban on Apple’s latest smartwatches while the patent dispute winds its way through…

Continue Reading

Trending